Human P53 enzyme-linked immunoassay (ELISA)

Human P53 enzyme-linked immunoassay (ELISA)

Kit instruction manual

This reagent is for research purpose only: this kit is used to determine the content of P53 in human serum, plasma and related liquid samples.

Experimental principle:

This kit uses the double antibody sandwich method to determine the level of human P53 in the specimen. The microplate is coated with purified human P53 antibody to make a solid phase antibody. P53 is added to the monoclonal antibody-coated microwells in turn and combined with the HRP-labeled P53 antibody to form an antibody-antigen-enzyme labeled antibody complex After thorough washing, add substrate TMB to develop color. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with P53 (P53) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the concentration of human P53 in the sample was calculated by a standard curve.

Kit composition:

Kit composition

48 hole configuration

96-well configuration

save

Instructions

1 serving

1 serving

Sealing film

2 pieces (48)

2 pieces (96)

sealed bag

1

1

Enzyme coated plate

1 × 48

1 × 96

Store at 2-8 ℃

Standard product: 135μg / mL

0.5ml × 1 bottle

0.5ml × 1 bottle

Store at 2-8 ℃

Standard dilution

1.5ml × 1 bottle

1.5ml × 1 bottle

Store at 2-8 ℃

Enzyme reagent

3 ml × 1 bottle

6 ml × 1 bottle

Store at 2-8 ℃

Sample diluent

3 ml × 1 bottle

6 ml × 1 bottle

Store at 2-8 ℃

Developer A liquid

3 ml × 1 bottle

6 ml × 1 bottle

Store at 2-8 ℃

Developer B liquid

3 ml × 1 bottle

6 ml × 1 bottle

Store at 2-8 ℃

Stop solution

3ml × 1 bottle

6ml × 1 bottle

Store at 2-8 ℃

20 times concentrated washing liquid

20ml × 1 bottle

30ml × 1 bottle

Store at 2-8 ℃

Sample processing and requirements:

1. Serum: room temperature blood coagulates naturally for 10-20 minutes, centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully and centrifuge again if a precipitate appears during storage.

2. Plasma: EDTA or sodium citrate should be selected as the anticoagulant according to the requirements of the specimen, mixed for 10-20 minutes, and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.

3. Urine: collected in a sterile tube and centrifuged for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, centrifuge again. Pleural and ascites, cerebrospinal fluid reference implementation.

4. Cell culture supernatant: When detecting secreted components, collect with a sterile tube. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. When detecting the components inside the cells, dilute the cell suspension with PBS (PH7.2-7.4), and the cell concentration will reach about 1 million / ml. Through repeated freezing and thawing, the cells are destroyed and the intracellular components are released. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. If a precipitate forms during storage, it should be centrifuged again.

5. Organize the specimen: after cutting the specimen, weigh it. Add a certain amount of PBS, PH7.4. Quickly freeze and save with liquid nitrogen for later use. After the specimen melts, it still maintains a temperature of 2-8 ° C. Add a certain amount of PBS (PH7.4) and homogenize the specimen with a manual or homogenizer. Centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully. After aliquoting, a portion is to be tested, and the rest is frozen for future use.

6. The specimen should be extracted as soon as possible after collection. The extraction should be carried out according to relevant literature. The experiment should be carried out as soon as possible after extraction. If the test cannot be performed immediately, the specimen can be stored at -20 ℃, but repeated freezing and thawing should be avoided.

7. The sample containing NaN3 cannot be detected because NaN3 inhibits the activity of horseradish peroxidase (HRP).

Steps

1. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of standard products in the first and second wells, and then add standard products in the first and second wells 50μl of diluent, mix well; then take 100μl from the first well and the second well and add them to the third and fourth wells respectively, and then add 50μl of standard diluent to the third and fourth wells respectively, mix well; Then take 50μl each in the third and fourth wells and discard it, then add 50μl each to the fifth and sixth wells, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, and mix well; After mixing, take 50μl from the fifth and sixth wells and add them to the seventh and eighth wells respectively. Then add 50μl of the standard dilution solution to the seventh and eighth wells respectively. Take 50μl from the eight wells and add them to the ninth and tenth wells. Then add 50μl of the standard dilution solution to the ninth and tenth wells. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentration is 90μg / mL, 60μg / mL, 30μg / mL, 15μg / mL, 7.5μg / mL).

2. Add samples: set up blank wells (the blank control wells do not add samples and enzyme reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the sample to be tested (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix.

3. Incubation: Seal the plate with a sealing plate and incubate at 37 ° C for 30 minutes.

4. Mixing solution: dilute 20 times concentrated washing liquid with distilled water 20 times and reserve.

5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing liquid, let it stand for 30 seconds and then discard, repeat this 5 times, pat dry.

6. Add enzyme: add 50μl of enzyme label reagent to each well, except blank well.

7. Incubation: The operation is the same as 3.

8. Washing: The operation is the same as 5.

9. Color development: add 50μl of developer A to each well, then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes.

10. Termination: Add 50μl of stop solution to each well to stop the reaction (at this time the blue will turn to yellow).

11. Determination: Measure the absorbance (OD value) of each well in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.

Precautions:

1. The kit should be equilibrated at room temperature for 15-30 minutes before being taken out of the refrigerated environment. If the enzyme label coated plate is unopened, the strip should be stored in a sealed bag.

2. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.

3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.

4. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the test substance in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please first dilute it with a certain multiple (n times) of the sample diluent and then determine it. When calculating, please multiply the total dilution Multiple (× n × 5).

5. The sealing film is limited to one-time use to avoid cross-contamination.

6. Please keep the substrate away from light.

7. Strictly follow the instructions, and the test results must be determined by the microplate reader.

8. All samples, washing liquids and various wastes should be treated as infectious agents.

9. The components of different batches of this reagent shall not be mixed.

10. If there is any difference with the English manual, the English manual shall prevail.

Taking the concentration of the standard as the abscissa and the OD value as the ordinate,

Draw a standard curve on coordinate paper, according to the OD of the sample

The value is determined by the standard curve; then multiplied by the dilution

Multiple; or calculate the standard using the concentration and OD value of the standard

The linear regression equation of the quasi-curve, the OD value of the sample

Substitute into the equation, calculate the sample concentration, and multiply by the dilution

The multiple is the actual concentration of the sample.

Kit performance:

1. The correlation coefficient R between the linear regression of the sample and the expected concentration is more than 0.990.

2. The batch and approval shall be less than 9% and 11% respectively

examination range:

3μg / mL -120μg / mL

Storage conditions and validity period:

1. Store the kit: 2-8 ℃.

2. Validity: 6 months

Refrigerated Truck

Refrigerated truck

CLW GROUP TRUCK Refrigerated truck, Chill Truck, Freezer Truck,Refrigerator truck,refrigerated van,refrigerator wagon, refrigerator car is used to transport frozen or fresh goods enclosed Van trucks, is equipped with a refrigerating unit of refrigeration device and polyurethane insulating compartment dedicated refrigerated transport cars, commonly used in frozen food transport (refrigerated truck), dairy (milk truck), fruits and vegetables (perishable cargo transport vehicles), vaccine and drug (vaccine transportation vehicles).

CLW GROUP TRUCK Refrigerated truck introduce

CLW GROUP TRUCK Refrigerated truck brief introduction

CLW GROUP TRUCK Refrigerated truck Structure:

Refrigerator car by walking part of the special purpose vehicle chassis, and heat insulation box body (generally consists of polyurethane materials, glass steel, color steel plate, stainless steel, etc.), refrigeration units, inside temperature recorder, etc. components, for the special requirements of the vehicle, such as meat hook car, installed with a meat hook, waist, the guide rail of aluminum alloy, ventilation slots and other optional.

CLW GROUP TRUCK Refrigerated truck Production technology of refrigerated compartment:

1, divided into pieces of "sandwich" plate bonding type, the domestic large refrigerated truck manufacturers are using this technology, the use of this technology to produce a high thermal insulation performance of refrigerated cars.

Refrigerated truck

2, divided into assembly of injection foaming type.

3, the whole skeleton injection foam type.

4, vacuum adsorption paste

CLW GROUP TRUCK Refrigerated truck Classification of refrigerating units:

Refrigerating unit is divided into non independent refrigeration unit and independent refrigeration unit. Domestic and imported units, etc.. General models are used in the external cooler, a mini refrigerator car with built-in refrigerator. For the lower temperature requirements of refrigerated vehicles, can be taken to the car body cold plate (equivalent to the function of the evaporator).

classification

According to the chassis manufacturer classification: Dongfeng refrigerator car, Changan Star refrigerator car, Qingling refrigerated trucks, refrigerated truck Jiangling, Jianghuai refrigerated trucks, Beiqi Futian refrigerated trucks

Semi Trailer

According to the bearing capacity of the chassis classification: Micro refrigerated trucks, small refrigerated trucks, medium-sized refrigerated trucks, large refrigerated trucks

According to the classification of car type: Bread refrigerated truck, refrigerated trucks, Semi-Trailer van truck

Characteristic

The container of the sealed refrigerated truck needs to be strictly sealed to reduce the heat exchange with the outside, so as to ensure the lower temperature in the refrigerator.

Refrigerated truck

The refrigeration equipment is connected with the container and provides a steady stream of refrigeration to ensure that the temperature of the container is in the range of the goods permitted.

Portability is generally used in refrigerated trucks transport goods are not for a long time to save the items, although there are refrigeration equipment, still need to quickly reach the destination.

A container similar to a heat insulated refrigerated truck is made of a material with better heat insulation effect, and the heat exchange is reduced.

CLW GROUP TRUCK Refrigerated truck Key equipment

1 refrigeration vehicle refrigeration unit

Refrigerated trucks refrigeration unit: for refrigerated container trucks to provide a steady stream of "cold" is an important equipment, generally installed in the container to the top of the front, air conditioning like appearance, but than the same volume of air conditioning has stronger refrigerating capacity.

Refrigeration unit is generally divided into two, independent type units and non independent type units. The difference lies in the independent unit completely by another unit to generate electricity for the maintenance work, non independent unit is completely through the work of the vehicle engine power to drive unit of the refrigeration work.

CLW GROUP TRUCK Refrigerated truck Carrier unit

Selection of refrigerating unit of refrigerated truck

According to the volume of refrigerated compartment and transport of goods to the requirements of the temperature, to choose a different power refrigeration unit.

2 refrigerated truck insulation body

The refrigeration unit of the refrigerated truck is used for temperature control, and the effect of the box body is used for maintaining the temperature. If the chiller is the provider of energy, the compartment is the storage of energy. In the three parts of the refrigerated truck, the refrigerating unit and the heat preservation box body are the most important, the removal of the chassis can be used as a small heat preservation, cold storage.

Selection of thermal insulation compartment

Body selection generally follow a few points: good thermal insulation performance, light weight, not easy to damage.

Refrigerated Truck,Freezer Truck,Refrigerated Van Vehicle,Chill Truck,Refrigerator Box Truck

CLW GROUP TRUCK , https://www.clwgrouptruck.net