Gra-Pnoida Development Co., Ltd. has successfully developed the automatic injection system for the preliminary molding machine of the bottle-making machine, and installed it on 8 sets of 4 bottles of IS bottles for the manufacture of medicine bottles and cosmetic bottles, with a speed of 410 bottles per minute. The automatic fuel injection system can be controlled by various IS bottle maker software. If the software is not suitable or the bottle machine is driven by a drum, it can be operated by a micro-keyboard, video display device and a cartridge memory. The processor controls.
The United Glass Company of the United Kingdom used a three-drop material bottle-making machine and a pressure blowing method to produce small-caliber beer bottles, which not only ensured the product quality, but also increased the production capacity by 50%. The 250mm brown Bidon light beer bottle produced by the company's three drop material bottle maker is in short supply in the international market.
Multi-screen Glass Co., Ltd. uses existing feeders and channels to build an automated glass shrink film sheathing production line and uses a shrink film method to decorate glass packaging containers. In the past, the company used three methods of screen printing, paint spraying and acid etching to decorate glass packaging containers. After the shrink film method, the glass bottles can be decorated with colored patterns and can effectively protect the surface of the bottles. Decorative glass packaging containers are very popular in the pharmaceutical and cosmetic industries.
PLM-Red-fearm has installed a high-speed image inspection system on the glass bottle production line. The system can detect the roundness of the bottle and can measure 800 per minute. It can also check the defects on the bottle wall, small bubbles, stones, protruding bottoms and other defects. The area of ​​the defects can be reduced to as little as 0.9mm2. Detected, the bottle wall sticking, bottle blowing and other defects can be identified, the detection system is simple, high resolution, using a telephoto / zoom camera, and a drip recording device.
The United Kingdom has also developed an advanced and energy-saving glass feed channel-BH-F400 series feed channel. This glass forehearth is an integrated top brick structure made of special refractory material with a cooling channel in the middle. When cooling is required, cold air is sent along the material supply center, thus overcoming the conventional design. The disadvantages of the efficiency of the channel heating system and the cooling system are not high. The channel temperature control is sensitive and the operation is simple. At the same time, nearly 70% of fuel can be saved due to the use of an automatic temperature control system and a high-pressure mixture to adjust the proportional system.
It can be expected that there will be new breakthroughs and developments in the manufacturing technology of glass packaging containers in the future.
Faux Mink Half Lashes,Eyelashes Strip,Half Corner Eyelashes,Classic Half Lashes
Zhengzhou Cuka Electronic Commerce Co., Ltd. , https://www.cukeyelashes.com