汕樟 Machinery Manufacturing Launches New Equipment

The two new SZJP-PF-PP foaming units and SZJP-LY-PP high-speed cast sheet units launched recently by Shantou Shikai Machinery Manufacturing Co., Ltd. were well received by users.

SZJP-PF-PP foaming units mainly have 800, 1300 and 1600 type gauges. The series of PP foamed sheet units are popular with users as soon as they are introduced. After users B reflect the use, the sheet produced by this unit has a smooth surface and a good molding effect. The most valuable is that the sheet density is more than 20% lower than ordinary PP sheet, and the product quality is comparable to that produced by Japanese equipment. In the plastic raw material prices soaring, and today's consumer demand for high products, the introduction of the device, no doubt to provide a better choice for the majority of users.

SZJP-LY-PP high-speed cast sheet sets mainly include 800-type, 1300-type and 1600-type for users to choose. This model can produce PP sheet from 0.05-0.16 mm at high speed. During the boot process, the equipment runs smoothly and the performance is good. Take 1300-unit 0,1 mm plate as an example, its effective width is 1200mm, daily output can be as high as 3.2T, and the quality of the plate is good, the plasticization effect is good, the thickness is even and the surface is smooth.

Compared with the ordinary PP sheet extrusion equipment, under the premise of ensuring product quality, SZJP-LY-PP high-speed cast sheet unit production has greatly improved, and production efficiency has doubled.