Manually solve the issue of PS version pull-off

In the manual version, if the pull of the pull plate is too large, it is easy to pull off the PS plate. This situation often occurs at the edge of the plate, and the middle part of the PS plate will not be broken. When this happens, there is no need to remake the plate. According to the author's experience of operating the Beiren J2205 bicolor printing machine, a solution is introduced here.

If the PS platen of the cylinder is broken at the edge of the platen, first loosen the platen screw, the platecrew, and the platecock head screw. Pull the PS plate out of the platen and cut it off with sharp scissors. The broken part; then, the head screw and the pull plate screw of the barrel drag edge plate clamp are also loosened, so that the plate clamp and the PS plate are moved to the crotch mouth together with an appropriate distance; and then the broken end of the PS plate is cut off again Put it in the holder of the mouthpiece, and then adjust it again after tightening the platen screw.

This solution not only avoids the waste caused by remastering, but also saves the time required for remaking, thus ensuring that the production workshop completes the production tasks on time.

Author: Bo Hua Li Chao Color Printing Co., Ltd.