During the day, the taps are used many times, and there are kitchen and bathroom settings. With the increasing quality of life, many people have more than two leading faucets. How can it be cleaned and maintained so that its service life will be longer?
1. The ideal cleaning technique is to rinse the faucet with clean water, and then use a soft cotton cloth to wipe off any moisture on the metal surface of the faucet, as water will volatilize and form scale on the metal surface. Wipe gently and do not rub it vigorously. Drying with a moistened sponge and a soft leather can make the faucet brilliance.
2, the best use of mild liquid glass cleaner, or acid-free, non-abrasive soft liquid and completely dissolved powder, non-friction solution polishing agent can remove the coarse mask on the faucet and accumulation, do not use any Friction cleaners, cloth or paper cloths, and any acid-containing cleaners, abrasives, or rough cleaners.
3, after a period of use, if you find that the amount of water is reduced, or even the phenomenon of water heaters turn off, you can gently unscrew the screen cover at the outlet of the tap, remove impurities, generally can be restored as ever.
4. Use a soft cloth to apply toothpaste to clean the surface, then use clean water to clean the surface. Do not use alkaline cleaners or use scouring pads or steel balls to test, so as not to damage the plating surface.
5, single-handle faucet in the use of the process, to slowly open and close, double-handle faucet can not be closed too dead, otherwise it will make the sealing plug fall off, causing not stop, can not stop the water.
6, the outlet area will generally have foaming device (also known as foaming device, not the same as the faucet, foaming device is also the same), because of water quality problems, often lead to a small amount of water after the use of the faucet, this may be because The foamer is blocked by debris, and the foamer can be screwed off with clear water or a needle to clarify the debris.
7, some brands of imported leading surface plating process is quite thick, but also caused its fatal injury, can not afford to touch or wear hard objects, so when in use, as far as possible to avoid contact with hard objects such as rings.
<\p><\div>
Zhejiang Hisun Electrical Appliance Co.,Ltd , https://www.cn-hisun.com