Analysis of common materials and purchasing skills of wardrobe door panels

[ Chinese wardrobe net ] In the process of home decoration, a large number of wardrobe door panels are needed. The quality of the wardrobe directly affects the decoration quality and decoration effect of the whole house, so be sure to pay attention when purchasing. Therefore, Xiaobian of the home network reminds you that when purchasing the wardrobe door panel, you must first master certain common sense, so that you can purchase quality products. Let's take a closer look at the small series below.

What kind of material is used for the wardrobe door panel?

Wardrobe door panel 1, solid wood

Speaking of the wardrobe material, it is naturally the best of solid wood, avoiding the excessive use of adhesives, healthier and more environmentally friendly, strong bearing capacity, safe and stable, and long service life, durable, but the cost of solid wood wardrobe is high, so the market Most of the wardrobes on the shelves are made of panels or panels to make wardrobes.

Wardrobe door panel 2, large core board

The large core board, also known as the blockboard, is a good material for the wardrobe frame. The large core board is a plywood with a solid wood core. The inner layer is made of a strip of strip-shaped logs, and then the outer layer is made of the outer material. The surface is smooth and flat, the stability is strong, and the deformation is not easy. For the plywood, plywood and plywood, the thicker the price, the more you can choose according to the pressure and strength.

Wardrobe door panel 3, high density board

High-density board is a commonly used wood-based board. It is made by shredding and pressing wood, branches, etc. in water. The density is uniform, the strength is high, and the processing is also easy. However, the disadvantage is that the moisture resistance is not good. Kitchens and other wet places should not be used, but it is not bad for making wardrobes.

Wardrobe door panel 4, solid wood particle board

The solid wood particle board is made by smashing the solid wood into granules and then pressing it with glue. It retains some physical properties of the solid wood, has better nail holding power and lighter texture, and does not cause too much pressure on the wardrobe, but the bearing capacity It is not weak, and it is low in cost and cost-effective. Therefore, it is often used in the manufacture of wardrobes.

How to choose the wardrobe door panel

1. Look at the cut surface of the sheet, whether the small fibers are tightly combined;

2, look at the environmental protection of the board, formaldehyde content ≤ 9mg / 100g that European E1 environmental standards have no harm to the human body;

3, look at the material of the sheet: generally can look at the product's instructions, to understand the relevant material information.

Finally, Xiaobian suggested that you try to choose some big brands when you buy the wardrobe door panel, so the quality is more assured.

Kitchenware & Tableware

Ningbo DSS Intelligent Technology Co., Ltd , https://www.dssking.com