In plastic printing, the viscosity of the ink has a great influence on the printing quality. By adjusting the viscosity of the ink, the printing effect can be effectively improved.
1. Hue
Reducing the viscosity of the ink to lighten the color, and vice versa. But you can't just adjust the viscosity to change the color, otherwise there will be other problems, such as water lines, color no gloss and so on. In the color adjustment, it is necessary to grasp the variation of the viscosity of the different colors in order to make better use of the viscosity. For example, when the primary yellow color has a large viscosity, there is a side that is biased toward red, and when the viscosity is small, green color appears; the green viscosity is large and the blue phase is small, and the viscosity shows a yellow phase.
2. Watermark
This problem is also generally closely related to the printing speed. The lower the printing speed, the greater the required ink viscosity, and vice versa. If the speed and viscosity do not match well, watermarks are likely to occur. Usually the printing speed is basically fixed, so the water lines are solved by increasing the ink viscosity. Another phenomenon is very similar to the water pattern. If you do not carefully observe and analyze it, it is easy to solve it like a water mark. To solve it with increasing viscosity, the result is not effective (or the opposite effect). This is something that many people will Ignored. I have personally contacted many printers and they often make mistakes. The difference between the water pattern and this phenomenon (temporarily called "flower") is that the watermark shows a very short and short line, while the "flower" shows a round dot. The solution is to reduce the viscosity of the ink, if it is too serious, it may be a problem with the quality of the printing plate or the ink. By adjusting the viscosity, the effect is only improved.
3. Cutting line
Smaller ink viscosities can prevent knife lines from appearing to the maximum. Especially when printing in gradation printing, these cutting lines are not printed, or are very small. There is also a case where the cut lines appear in the meshed position and they are all at the starting point.
4. Squeegee effect
The viscosity is large and the effect of squeegeeing is not good (it means that the squeegee is not clean), especially for the black ink, generally a smaller viscosity is used to prevent the squeegee from being clean.
5. Overprint fault
Including two cases: one refers to the latter color of the ink dissolved in the previously printed color, so that discoloration or smearing, ghosting, at this time should increase the ink viscosity of the latter color; the other case is the latter color Ink printing is not on the previous color ink. At this time, the viscosity of the ink of the latter color should be adjusted.
6. Ink transfer
When printing shallow webs, smaller viscosities are beneficial to improve ink transfer and avoid undesirable "white spots". As can be seen from the above, viscosity has a close relationship with many printing problems, and mastering the adjustment of viscosity can solve many problems.
The indoor hanging fireplace is a modern, fashionable and practical ornament with many advantages. First, it has a unique design and can be hung on the wall, saving space and providing more flexibility. Secondly, the indoor hanging fireplace can add warmth and comfort to the interior space, in addition, it can also act as a unique focal point, adding to the visual appeal of the room.
Indoor hanging fireplaces have a wide range of uses. Whether in a family home, apartment, holiday home or commercial premises, it can be used to provide warmth and beauty. It is suitable for all kinds of interior Spaces such as living room, bedroom, office and dining room. Because of its unique design, it can be installed and moved as needed, making it ideal for people who rent homes or need to move frequently.
Carbon steel is one of the commonly used materials for indoor hanging fireplaces. Carbon steel has high strength, wear resistance and corrosion resistance, and can withstand high temperatures and long periods of use. It also has an elegant look that is able to match a variety of interior decoration styles. In addition, the carbon steel material also has good thermal conductivity, which can quickly transfer heat and make the room warm rapidly.
Hanging & Suspended FAQS
1:What are the benefits of a suspended fireplace?
First of all, it can become the focal point of interior decoration, adding beauty and modernity to the room. Its unique design and position hanging in the air make it a striking artwork that can be a highlight of a room. Second, hanging fireplaces can save space. Compared with traditional fireplaces, it does not need to take up floor space and can be installed on the wall or ceiling, making the room more spacious and tidy. In addition, hanging fireplaces burn more efficiently and can provide more heat, making the room more warm and comfortable. Finally, the hanging fireplace can provide 360-degree views, allowing people to enjoy the beauty of the flames from different angles, enhancing the viewing.
2:Can my floating fireplace be wood-burning?
Yes, your floating fireplace can be wood-fired. You may choose to install a wood-burning fireplace so that wood is burned in the fireplace to generate fire and heat.
3:Can a central suspended fireplace be gas-fuelled?
Central hanging fireplaces can use natural gas as fuel. This type of fireplace usually has a modern design and can be hung in the center of the room. The use of natural gas fuel can easily control the size and temperature of the flame, and does not produce smoke and dust. At the same time, natural gas fuel is more environmentally friendly, does not produce carbon dioxide and other harmful gas emissions.
4:What is a ceiling suspended fireplace?
A hanging fireplace is a type of fireplace that is mounted on the ceiling. Unlike traditional fireplaces, hanging fireplaces do not need to be placed on the ground or fixed to the wall, but are suspended through a suspended ceiling. This design allows the fireplace to be more flexible in any location, whether in indoor or outdoor Spaces.
5:What is a wall-hanging fireplace?
A wall fireplace is a type of furnace mounted on a wall. It is usually made of metal and can be hung on the wall without the need for floor space. Wall mounted fireplaces use electricity or gas as fuel to generate warm air through heaters and fans. They usually have adjustable flame effects and temperature control functions that can be adjusted according to personal preferences and needs.
6:Why is carbon steel used for hanging fireplace?
Carbon steel is often used in the production of hanging fireplaces, mainly for the following reasons. First of all, carbon steel has good strength and durability, and can withstand the weight of the fireplace and the pressure of long-term use. Secondly, carbon steel has good thermal conductivity and can quickly conduct the heat in the furnace, so that the fireplace can quickly heat and provide a warm environment. In addition, carbon steel also has the characteristics of high temperature resistance, can withstand the heat and flame generated by high temperature combustion inside the fireplace, to ensure the safe operation of the fireplace. Finally, carbon steel has a lower cost and is relatively economical, making the production cost of hanging fireplaces more manageable.
7:Can I customise my suspended fireplace?
Of course you can customize your hanging fireplace! Custom fireplaces can be designed according to your preferences and home style. You can choose the size, shape, material and color of the fireplace to ensure that it blends perfectly with your room. In addition, you can also choose accessories for the fireplace, such as charcoal fire effects, temperature regulators and remote controls, etc., to increase the function and convenience of the fireplace. Custom fireplaces can meet your individual needs and bring warmth and comfort to your home.
8:How much does it cost to install a suspended fireplace?
The cost of installing a hanging fireplace varies depending on a number of factors, including the make, model, and material of the fireplace, the location and requirements of the installation, and the labor costs of the location. In general, hanging fireplaces usually cost between $1,000 and $5,000, not including installation costs. Installation costs are usually on a case-by-case basis and additional labor costs may be required. Therefore, it is best to consult a professional fireplace installation service provider to get an accurate quote.
9:How do I maintain a hanging fireplace?
A wall-mounted fireplace is a unique heating device that requires regular maintenance to ensure its proper operation and safety. Here are some tips for maintaining a wall-mounted fireplace:
1. Clean the casing: Clean the fireplace casing regularly to remove dust and dirt. You can use a soft cloth or vacuum cleaner to clean, avoid the use of chemical cleaners, so as not to damage the fireplace surface.
2. Clean glass doors: Wall mounted fireplaces usually have glass doors that need to be cleaned regularly to maintain transparency. Use a special fireplace glass cleaner, clean according to the instructions, and avoid scratching the glass with rough materials.
3. Check the combustion chamber: Check the combustion chamber of the fireplace regularly to ensure that no excessive ash or debris has accumulated. If you find a buildup, you can use a small brush or vacuum cleaner to clean up.
4. Check the flue: Check the flue of the fireplace regularly to ensure that it is unimpeded. If accumulation or blockage is found, it should be cleaned up in time to ensure smooth exhaust gas.
5. Regular maintenance: Regularly ask professionals to maintain and overhaul the fireplace. They can perform more in-depth cleaning and inspection to ensure that the various components of the fireplace are functioning properly.
Indoor Fireplaces,Wood Burning Stoves,suspended fireplace,Wood Burning Fireplaces,Modern Fireplace
Henan Jinbailai Industrial Co.,Ltd , https://www.jblbbqgrill.com