One: install exhaust pipe
Our factory purchased a Komori offset press using pneumatic transmission in 1997. Bleed air from the air compressor every day after work The working environment and the appearance of the ground.
Inspired by the decompression exhaust pipe of the household electric water heater, the author connects a plastic pipe with a diameter of 10mm from the air compressor exhaust port, one end is connected to the air compressor exhaust pipe, and the other end is inserted into the drain port (available water tank drain port) ), Which not only facilitates the discharge of wastewater, but also reduces the pollution of wastewater to the ground. This method is also applicable to other offset printing machines.
Two: small offset printing machine feed belt modification
The factory borrowed a small offset printing machine AR-010 made in Japan from China Banknote Card Factory in 2002. Due to the long service life of the machine when borrowed, the feed belt was smooth and tacky, and each printing deviated from the positioning wheel. One of the four feed belts was broken and could not be used. Multiple contacts with the manufacturer had no results. Because the problem of the paper conveying belt may cause the production to stop, the author found the waste roller lining cloth used in the offset press, butted the interface with the sewing machine, and made the interface align with the paper feeding direction. After being installed, the paper positioning effect is very good, which solves a major problem in the work.
Bamboo Outdoor Decking ,Bamboo Deck Boards,Outdoor Bamboo Flooring, Outdoor Bamboo Decking
ZHEJIANG JIAHE BAMBOO TECHNOLOGY CO., LTD , https://www.zhuart-bamboo.com