Water heaters are one of the essential home appliances in the family, allowing people to use hot water at any time, which improves people's happiness index. However, in the process of moving, some household appliances cannot be disassembled and installed by themselves. It is necessary to have professional people to help. The water heater is one of them, so how to transfer the water heater. Let's take a look at the specific steps of the water heater transfer machine .
First, how to choose a water heater
1. Choose a brand. Many home appliances have already experienced some stagnation, bankruptcy, and restructuring, which has led to the need to reposition the home appliance market. So the old brand is still there, is there still high-tech content, this needs to be well studied.
2. Select capacity. The capacity, size and volume of an electric water heater are different. This needs to be considered according to the space of each household's water heater. This also needs to look at the number of people taking a bath to analyze.
3. Select the function. Choose storage type or instant type. The models here are different, the functions are different, the volume and electricity consumption are different.
4. Consider the power supply. Generally, the power of the water storage type water heater is between 1200W and 3000W, and the hot type will be relatively high, but it has higher requirements on the meter wire. Therefore, before selecting, it is necessary to look at the suitable switch socket for the place where the water heater is attached. .
5, see performance. On the general product materials, it can achieve high temperature resistance, good heat preservation, anti-corrosion leakage and heat preservation and energy conservation. Is there a scientific certificate and quality inspection report? This is related to the safety of bathers and must be taken seriously.
6, choose after sales. General products from production, to sales, and then into the consumer family, these links, consumers pay more attention to after-sales service. Therefore, when purchasing, choose a big brand, choose to open, warranty card service, so that the future maintenance is guaranteed.
Second, how to transfer water heaters
1. Preparation tools:
Before starting to transfer the electric water heater, you must prepare the tools needed for the transfer process, such as wrenches and ladders (the water heater is usually installed in the high place of the bathroom).
2. Power off the water heater:
The power supply used by the water heater is generally 220V AC with a current of 16A, which is much higher than the safe current and safety voltage for the human body. For safety, the power supply of the electric water heater must be disconnected.
3. Water treatment and water discharge treatment of the water heater:
Under normal circumstances, the inside of the water heater can store 50~60 liters of water, which is heavier. In order to facilitate the disassembly, the water heater must first be shut off and drained. Specifically, first turn off the water inlet valve of the water heater, disconnect the water source; then use a wrench to loosen the water outlet of the water heater and drain the water until the water outlet no longer emits water.
4. Disassemble the water heater:
After the water inside the water heater is discharged, the disassembler needs to remove the water heater from the bracket through a ladder and the like. Under normal circumstances, the water heater is suspended and bolted to its bracket, and the disassembling process is not very simple. Simply loosen the bolt with a wrench and remove the water heater. After removing the water heater, you need to check whether the water heater bracket can be removed. Under normal circumstances, there is an expansion bolt between the water heaters, which is difficult to remove.
5, install the water heater:
Once the water heater has been removed and shipped to the location where it needs to be installed, the water heater needs to be installed. During the installation process, the bracket of the water heater needs to be fixed at a high position, and the water heater is hung and fixed after the heat is applied. The last step is to install water and outlet pipes for the water heater, and to store the water inside the water heater, and finally power on. When the water heater can work normally, it means that the water heater is installed.
The above is the whole content that Xiaobian brought to you how to choose the water heater and water heater. I believe everyone has a basic understanding of the water heater after reading this article. I hope this article will help you to solve your problem. If you want to know more, please continue to pay attention to our decoration home network.
More related wonderful reading:
How to transfer the water heater? Water heater transfer notice
Table Mat And Place Mat,Silicone Table Mat,Luxury Table Mat,Silicone Place Mats
vchomy , https://www.vichenivchomy.com