First, the font problem
1 Some font library description methods are different, the overlap of the strokes will be out of the stack, be careful!
2 Paragraph text containing special characters in Chinese and English is prone to problems, such as "■, @, ★, ○".
3 Use the new standard GBK font to solve the problem of lost words.
4 strokes are too fine fonts, it is best not to use more than 3 colors of aliasing, such as (C10 M30 Y80), etc., the same reason, does not apply to dark bottom anti-white characters. If you can't avoid it, you need to slap the reverse white, apply the base color or a print monochrome (usually black K).
Second, the problem of gradual change
1 common problem is this: such as red → black gradient, setting error: (M100 → K100) will be difficult to see in the middle!
The correct setting should be like this: (M100 → M100 K100) After careful analysis, you will understand that other situations are analogous.
2 transparent gradient, is suitable for network graphics, grayscale can also be, but the final output is not possible, because its spatial mixing mode is RGB, the screen mixed color is too different from the printing CMYK, pay close attention.
3 The gradient of the black part should not be too low-order, such as 5% black. Because there is a black overprint option when outputting, less than 10% of the black is usually used instead of overprinting, which causes problems. Similarly, use pure light black. Be careful.
Third, the picture problem
1 Regarding the psd file, one thing to note is that you should not do any "destructive operations" after importing it, such as: rotation, mirroring, tilting, etc. Due to its transparent mask, the output will produce a broken graph.
2 is still a mask, you should be careful in the use of coreldraw, if necessary, it is better to take the "place container" method to compare insurance.
3 resolution and resampling
Do not do this in corel, "convert to bitmap" is indeed convenient, but the loss is color reproduction, to be professional, take it in ps.
4 color mode, don't blame me, this is the old hand and the wrong hand.
All images must be cmyk or grayscale and monochrome bitmaps, otherwise they cannot be output.
Fourth, the output accessories
That is, the output of the corner line, color code, etc., and now it seems that the output company service is very good, do not worry too much.
Five, pre-press inspection
Use PDF files for pre-press inspection! Note that it is not directly printed with a coreldraw pdf! wrong.
The order is like this:
*.cdr → The output is “Encapsulation EPS, ie *.EPSâ€, and then Acrobat Distiller will generate the EPS*.pdf.
The PDF file produced in this way can be directly printed by some printing manufacturers, and the file is relatively small, and can be transmitted by E-mail, which is very convenient.
If there is an error in your file, you can see it in PDF preview at a glance! (Note: Distiller 4's effect on some hooks is incomplete and needs attention.)
CD common ills solution
First, the biggest criticism is instability, false deposits, sudden exits, and the interface becomes "swaying" and then the interface font becomes larger, then die, and so on.
The solution is:
1, increase the memory; engaged in design, no 512M memory is unimaginable.
2, delete the fonts that are not commonly used, (common fonts can be placed in a folder first, when installing, remove the checkmark before copying the fonts into the font folder, and then confirm, so the font folder is just some Shortcuts. Then you need to install the fonts temporarily, and then install the "Font..." checkbox. You can easily distinguish the commonly used and newly installed fonts. If you don't use them, delete them. Off)
3, use 2000/XP (do not use Wending CS series fonts in XP.)
4. After the problem occurs, you must uninstall and restart. If you have a CD9 installation file on your hard drive, you can pack it for a while.
Second, the text typesetting problem. Many people complain that CD9 Chinese characters are not right, text boxes are not easy to use, and text boxes cannot turn curves. In fact, as long as everyone develops a good habit, they can be solved:
1. If you can use art text, don't use text box. Because the text box turns the curve is very troublesome: first draw a rectangle that covers the text box, then ALT+F3 to bring up the filter, select the transparency, select black, fill 100%, check "freeze" (the most important step), apply , then lift the group and remove the unwanted things.
2. When typing numbers or English, enter a space before and after.
3. After the text is finished, press ctrl+T to change the text character moment from the default 20 to 0, and adjust the line to 120% or 150%, 200%. This way the text will not appear very scattered.
4, the final adjustment of the paragraph alignment, CD often has two lines between the two characters are not aligned, then you can select a few words by pressing "ctrl + shift +>" or "ctrl + shit + <" combination of keys can be very convenient Adjustment.
Third, the printing problem. The solution is also very simple, that is, all the pictures, effects, and shadows are converted into CMYK bitmaps. If you print, 200DPI is enough, fast and good.
Fourth, pre-press issues. If you want to send a film, after imposition, bleeding, and regulation:
1, all text turns curves.
2. All non-CMYK color models are changed to CMYK.
3. All rotated bitmaps are transferred to the bitmap.
4, all effects, especially stereo, shadow, image precise cropping to separate or index the map.
5. All RGB images are transferred to CMYK.
6, the CD comes with a gradient fill is RGB, also pay attention.
In short, be sure to look at the "File Information" under the "File" menu before copying the file to the company. Never have RGB and effects.
Fifth, compatibility issues. In fact, as long as the format of cd8 can be saved. 9, 10, 11 can be opened. If you want FH to recognize it, you will save it as 6 and you will compress it when you save it.
Different views: The best CD9 production before output is still saved in cd9 format, because cd8 output traps are more than cd9.
Many output traps can be seen in the cd9 preview, while cd8 does not. R0g0b0 cd9 When k100 and cd8 are four colors, the output company sees a lot of cd8 barcodes produced in four colors. Cd9 uses cd9 default pantone color wheel, which is converted to cmyk in cd8 due to incompatibility. Saving cd9 to cd8 format will result in a loss of page size. Saved as cd8 format, the output company thinks that when you made cd8, it will be output with cd8.
First, the font problem
1 Some font library description methods are different, the overlap of the strokes will be out of the stack, be careful!
2 Paragraph text containing special characters in Chinese and English is prone to problems, such as "■, @, ★, ○".
3 Use the new standard GBK font to solve the problem of lost words.
4 strokes are too fine fonts, it is best not to use more than 3 colors of aliasing, such as (C10 M30 Y80), etc., the same reason, does not apply to dark bottom anti-white characters. If you can't avoid it, you need to slap the reverse white, apply the base color or a print monochrome (usually black K).
Second, the problem of gradual change
1 common problem is this: such as red → black gradient, setting error: (M100 → K100) will be difficult to see in the middle!
The correct setting should be like this: (M100 → M100 K100) After careful analysis, you will understand that other situations are analogous.
2 transparent gradient, is suitable for network graphics, grayscale can also be, but the final output is not possible, because its spatial mixing mode is RGB, the screen mixed color is too different from the printing CMYK, pay close attention.
3 The gradient of the black part should not be too low-order, such as 5% black. Because there is a black overprint option when outputting, less than 10% of the black is usually used instead of overprinting, which causes problems. Similarly, use pure light black. Be careful.
Third, the picture problem
1 Regarding the psd file, one thing to note is that you should not do any "destructive operations" after importing it, such as: rotation, mirroring, tilting, etc. Due to its transparent mask, the output will produce a broken graph.
2 is still a mask, you should be careful in the use of coreldraw, if necessary, it is better to take the "place container" method to compare insurance.
3 resolution and resampling
Do not do this in corel, "convert to bitmap" is indeed convenient, but the loss is color reproduction, to be professional, take it in ps.
4 color mode, don't blame me, this is the old hand and the wrong hand.
All images must be cmyk or grayscale and monochrome bitmaps, otherwise they cannot be output.
Fourth, the output accessories
That is, the output of the corner line, color code, etc., and now it seems that the output company service is very good, do not worry too much.
Five, pre-press inspection
Use PDF files for pre-press inspection! Note that it is not directly printed with a coreldraw pdf! wrong.
The order is like this:
*.cdr → The output is “Encapsulation EPS, ie *.EPSâ€, and then Acrobat Distiller will generate the EPS*.pdf.
The PDF file produced in this way can be directly printed by some printing manufacturers, and the file is relatively small, and can be transmitted by E-mail, which is very convenient.
If there is an error in your file, you can see it in PDF preview at a glance! (Note: Distiller 4's effect on some hooks is incomplete and needs attention.)
CD common ills solution
First, the biggest criticism is instability, false deposits, sudden exits, and the interface becomes "swaying" and then the interface font becomes larger, then die, and so on.
The solution is:
1, increase the memory; engaged in design, no 512M memory is unimaginable.
2, delete the fonts that are not commonly used, (common fonts can be placed in a folder first, when installing, remove the checkmark before copying the fonts into the font folder, and then confirm, so the font folder is just some Shortcuts. Then you need to install the fonts temporarily, and then install the "Font..." checkbox. You can easily distinguish the commonly used and newly installed fonts. If you don't use them, delete them. Off)
3, use 2000/XP (do not use Wending CS series fonts in XP.)
4. After the problem occurs, you must uninstall and restart. If you have a CD9 installation file on your hard drive, you can pack it for a while.
Second, the text typesetting problem. Many people complain that CD9 Chinese characters are not right, text boxes are not easy to use, and text boxes cannot turn curves. In fact, as long as everyone develops a good habit, they can be solved:
1. If you can use art text, don't use text box. Because the text box turns the curve is very troublesome: first draw a rectangle that covers the text box, then ALT+F3 to bring up the filter, select the transparency, select black, fill 100%, check "freeze" (the most important step), apply , then lift the group and remove the unwanted things.
2. When typing numbers or English, enter a space before and after.
3. After the text is finished, press ctrl+T to change the text character moment from the default 20 to 0, and adjust the line to 120% or 150%, 200%. This way the text will not appear very scattered.
4, the final adjustment of the paragraph alignment, CD often has two lines between the two characters are not aligned, then you can select a few words by pressing "ctrl + shift +>" or "ctrl + shit + <" combination of keys can be very convenient Adjustment.
Third, the printing problem. The solution is also very simple, that is, all the pictures, effects, and shadows are converted into CMYK bitmaps. If you print, 200DPI is enough, fast and good.
Fourth, pre-press issues. If you want to send a film, after imposition, bleeding, and regulation:
1, all text turns curves.
2. All non-CMYK color models are changed to CMYK.
3. All rotated bitmaps are transferred to the bitmap.
4, all effects, especially stereo, shadow, image precise cropping to separate or index the map.
5. All RGB images are transferred to CMYK.
6, the CD comes with a gradient fill is RGB, also pay attention.
In short, be sure to look at the "File Information" under the "File" menu before copying the file to the company. Never have RGB and effects.
Fifth, compatibility issues. In fact, as long as the format of cd8 can be saved. 9, 10, 11 can be opened. If you want FH to recognize it, you will save it as 6 and you will compress it when you save it.
Different views: The best CD9 production before output is still saved in cd9 format, because cd8 output traps are more than cd9.
Many output traps can be seen in the cd9 preview, while cd8 does not. R0g0b0 cd9 When k100 and cd8 are four colors, the output company sees a lot of cd8 barcodes produced in four colors. Cd9 uses cd9 default pantone color wheel, which is converted to cmyk in cd8 due to incompatibility. Saving cd9 to cd8 format will result in a loss of page size. Saved as cd8 format, the output company thinks that when you made cd8, it will be output with cd8.
Article source address: http://
We are a reputable manufacturer creating various kinds of indoor and outdoor railings, fire pits, BBQ grills, façade elements, and floral arrangements.
pots, sculptures, and other specialized items made with CNC equipment. Corten wire is used in the welding of every junction. Remember that we offer a pre-weathering service and that we may give a bespoke service on Corten Steel; if you have a unique need, contact us here! Did you realize? Get in contact with us right now for a free price! We can make corten steel in any custom size or share you require.
-Constructed with Corten Steel
-Natural patina of rusty finish
-H 1500mm ( may be made 5ft high) ( can be made 5ft high)
- Handmade object
- Also available in an aluminum and stainless steel variant
- As the sculpture is left out in the elements, its patina will deteriorate and cure over time.
| Name | CRustic Corten Steel Sculpture |
| Material | Corten steel |
| Cooking plate Size | Diameter 1000mm |
| Size | 1500*1200mm |
| Weight | 100KG |
| Packing | Pallet/carton/wooden box packing |
Packing
Packing will by pallet/carton/ wooden box,according to different demand.
Steel Sculpture,Steel Garden Art,Metal Garden Sculptures,Metal Art Garden
Henan Jinbailai Industrial Co.,Ltd , https://www.designsteelarts.com