How to use collector magnetic stirrer
1. The power supply and the cup are ready, open the lid of the stainless steel container, place the cup in the middle of the stainless steel container, add thermal oil or silicone oil to the stainless steel container to the appropriate height, and put the stir bar into the solution in the cup. Turn on the power switch, the indicator light is on, rotate the speed potentiometer in the direction of the municipal government, and the simple speed is from slow to fast. Adjust to the required speed.
2. When heating, connect the temperature sensor probe, clamp the probe on the bracket, and move the bracket so that the temperature sensor probe is inserted into the solution for not less than 5 cm, but it cannot affect the stirring.
3. Turn on the power switch, after about 1 minute, the red digital display on the upper row of the meter is 400, the lower row is 0.0, and after 30 seconds of rest, the upper row display value is the current water temperature, press the / SET button, the upper row displays SP, press â–² or â–¼ key to make the lower row display the desired set temperature, then press the / SET button, the upper row displays ST, still press the / SET button to return to the actual temperature displayed in the upper row, at this time, wait After a few seconds, the smart watch starts to work in memory.
If you want to change the parameters of the smart meter, such as resetting a higher temperature (or the original setting error is too large) if you want to change the parameters of the smart meter, such as resetting a higher temperature (or the originally set temperature (The error is too large), you need to press the / SET button, the upper row displays SP, press the â–² or â–¼ button to make the lower row display the desired temperature, then press the / SET button, the upper row displays ST, still press the / SET button, up The row shows the actual temperature. At this time, after holding down the / AT key for 20 seconds, the RUN light flashes, and the instrument starts auto-tuning, waiting for automatic back and forth (refers to stop heating when the temperature is automatically raised to the set temperature, and start heating when it returns below the set temperature) twice After the self-adjustment, the RUN light turns off, and the instrument draws a set of parameters that will never change and can overcome the overtemperature. Need to press the / SET button, the upper row is displayed as SP, press the â–² or â–¼ button to make the lower row displayed as the temperature to be set.
4. If the stirrer jumps during work, please turn off the power and turn it on again, the speed will change from slow to fast, and adjust it to return to normal.
Glass Single Wall Bottle is made of high-quality glass. It is crystal clear, healthy and environmentally friendly. You can directly see the whole picture of your favorite drinks.
It has single wall. It sacrifices thermal insulation and improves portability. Holding it in your hand all the time will not cause any discomfort.
Glass Single Wall Bottle,Single Wall Drinking Bottle,Single Wall Glass Drinking Bottle,Single Wall Heat Transfer Printing Bottle
Ningbo Auland International Co.,Ltd. , https://www.everwinbottle.com