[ Chinese wardrobe net ] In fact, such a small hardware accessories like the handle does not need to find a professional furniture installation master, independent installation is simpler, but like a project, many handles need to be installed, it is another matter, nonsense, not to mention, the following wardrobe cupboard door handle what steps to install it!
Door handle installation step 1: preparation work
There are many kinds of door handles, there are hidden handles and such ordinary handles. This site is a small series to tell you about the installation of ordinary cabinet door handles. The installation of the door handles must first be prepared with a tape measure and an electric drill and a screwdriver. Tools, and some accessories for small screws.
Door handle installation step 2: determine the hole spacing of the handle
Different sizes of door handles are not the same, so you need to use a tape measure to determine the hole spacing between the handles. It must be accurate, because it is necessary to determine the hole location of the screw holes on the door.
Door handle installation step 3: Determine the handle installation position and hole position
First of all, to determine the installation position of the cabinet door, which depends on the door of the cabinet, as well as the height of the cabinet, the position of the cabinet door, generally preferred by its own convenience; then the pitch of the handle just measured, direct vertical mapping On the door panel, mark the hole with a marker.
Door handle installation step four: drilling
Choose a drill of the right size. Generally, the handles are small holes, and then drill holes vertically in the marked position with an electric drill.
Door handle installation step 5: Install the door handle
Hold the door handle with your left hand, align the handle with the hole that you just punched, and then pass the small screw through the hole from the back of the door. After alignment, tighten the screw with a screwdriver.
The basic outer handle is installed like this. The finished furniture is equipped with the standard handle. When the furniture installer installs the finished furniture, the handle can be installed. Customized furniture or need to be in the place without handle. Conditional metal handles can be constructed according to the above methods. During the construction process, the hole position must be marked accurately.
Slicer and dicer(meat dicer) are used in different fields of food industrial such as for meat, cheese, vegetables, fruits etc. Helper`s slicer and dicer seies are applied in both restaurant and industrial plant. To produce portioned bacon, the Rib chopper will help. To make vegatable and meat mixture for dumpling production, QD02 vegetable dicer will be the best choice.
In addition to them,we also supply the cubing machines.
Potato Slicer,Food Chopper,Vegetable Dicer,Vegetable Cutter,Meat Dicer,Cubing Machines
Helper Machinery Group Co., Ltd. , https://www.helperfoodtek.com