[ Zhonghua Wardrobe ] Although there are fewer and fewer hinge doors for wardrobes , there are still many cabinets, lockers and some file cabinets that use hinges to open the doors. The hinges are easy to open. The phenomenon that the page door can't be closed, the following website Xiaobian teaches you that the hinge door can't be adjusted, and the furniture wardrobe door hinge is loosely repaired.
First, furniture wardrobe, locker, cabinet door hinge loose repair method
If the door on your four-door hinge is not closed, how to adjust? Generally, the original hinge is broken, so it can't be closed. Just remove the original hinge and replace it with a new hinge. Please pay attention to the size of the hinge. Otherwise, the new hinge will not be closed. As for the installation of the hinge, refer to the different installation methods of the hinge of the cabinet door, and the steps of the hinge installation method [illustration].
Second, the hinge door loose maintenance method
1. Wood screws do not match the wood and cause looseness.
a. Hinge door failure condition: When making furniture, the wood screw is not screwed into the wood with a screwdriver (screwdriver), but is nailed with a small hammer, so that the wood screw does not match the wood. Doors that often open the wood screws that are nailed into the wood will cause slippage due to vibration and loosen the hinges.
b. Corresponding solution repair method: the door hinge is removed, the same length is found, and the wood screw with the diameter of the log screw is thicker and can pass through the hinge hole, and the screwdriver is screwed into the door frame again with a screwdriver (screwdriver). Or after the hinge is removed, use axe to cut a few small wooden wedges. The glue is nailed into the screw å‘L with a small hammer. After the glue is solidified, use the carpentry shovel to level the exposed wedges of the frame and re-use the log screws. Screw the screwdriver (screwdriver) into the original hole position.
2. Improper selection of hinge screws and improper installation process lead to loosening
a, hinge door failure status: furniture door hinge hinge loose, mainly due to improper selection of hinge screws and improper installation process. The former case is mainly manifested in the fact that the furniture door leaf is too heavy, and the wood of the door frame is too soft, so the nail holding power is not strong. In addition, the optional hinge is small and the wood screws are short, which causes the hinge to be loose.
b. Corresponding to the repair method: The repair method is: select the appropriate hinge and replace the screw. Generally, a door with a length of more than 100 cm should be a pair of 65 mm long hinges with a 25 mm long wood screw. Small base cabinet, chest of drawers, and the door of the desk should be 50-mm long hinges or one pair of half-lengths when used for 50-100 cm long, with 18 mm long wood screws. Clothes box, suitcase sitting. For small door fans such as bedside tables, a 40 mm long hinge should be used, with 16 mm long wood screws.
Therefore, the standardization of cabinet hinge door hinge installation plays a crucial role. It is better to repair and replace the hinge at this time or to find the furniture repair master to help replace the website platform.
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetsaccessories.com